Polychlorotrifluoroethylene is a thermoplastic chlorofluoropolymer, abbreviated is PCTFE. PCTFE was first sold as the brand name KEL-F® by 3M and today is also sold under the brand names Neoflon®, Diakon®, Chemflour® and Tecaflon®, however PCTFE resin has the same chemical structure and properties as the original KEL-F® brand material.
PCTFE offers
- Excellent electrical, mechanical, and physical properties
- No flammability
- Good chemical resistance
- Near zero moisture absorption
MCP Engineering Plastics Limited are PCTFE KEL-F® suppliers and PCTFE KEL-F® manufacturers.
We machine PCTFE KEL-F® from sheet, rod and tube. Extruded 5mm diameters to 45mm diameters. We also offer grinded material and extra annealing for strict tolerances. Irrespective of the size or volume you require, we can offer PCTFE KEL-F® products and components to your specification.
KEL-F® PCTFE (Polychlorotrifluoroethylene) is a melt-processable chlorofluoropolymer. The presence of a chlorine atom, which has a greater atomic radius than that of fluorine, gives rise to irregularities in the polymer chain and reduces polymer crystallinity. This results in PCTFE KEL-F® having a relatively low melting point among fluoropolymers. It is also the polymer with the lowest water vapor and moisture absorption rate. It resists ignition because its Limiting Oxygen Index (LOI), which is greater than 95.
PCTFE KEL-F® will resists attack by most chemicals, a property that is exhibited due to the presence of its high fluorine content. It is oxidation resistant because it does not have any hydrogen atoms.
The main field of application of PCTFE KEL-F® is cryogenics due to the fact that it is the fluoropolymer that best retains its mechanical properties at extremely low temperatures and is therefore the least fragile of the fluoropolymers.
PCTFE KEL-F® is incompatible with alkaline metals and in some cases with organic amines. Its use is not recommended at temperatures above 150°C.
PCTFE KEL-F® is recommended for cryogenic application and handling of gases. PCTFE KEL-F® has better mechanical properties than other fluoropolymers and low permeability.
MCP Engineering Plastics Limited, based on the Hertfordshire and Essex County border, are an established and experienced PCTFE KEL-F® supplier and manufacturer to a range of industries throughout the UK. We have a wide range of filled materials, in all sizes, ready for despatch, ex-stock.
For further technical information on our range of PCTFE KEL-F® specifications, please view our Materials pages page and Technical Data Sheets pages.